DETEX SD - Kırlıoğlu Patlayıcı | Kırlıoğlu Kimya Sanayi

DETEX SD gives its delay to the shock tube going into the hole. It is not used to initiate cap sensitive explosives. There is no need to bury it in the ground as it does not create any shrapnel effect. 6 tubes can be placed in the DETEX SD connectors and exploded without any problems. It can be initiated with another DETEX SD detonator or electric detonator.

Usage Advantages

Possibility to be produced in desired shock tube length

Ease of use and carrying comfort

Explosive desensitization in column charge

Highest level of safety against mechanical impact and friction

Increasing work efficiency with fast use and ease of connection

Technical specifications

Shell Aluminum	Shock Tube 3 Layer - 3 mm diameter (outer)	Nominal Tensile Strength 25 kg (+20°C)
Usage Temperature Range -30°C to +60°C	Shelf Life 24 months

Usage Suggestions

During use, care should be taken not to damage the connection blocks, shock tube and other plastic apparatus.

Detonator caps should be kept away from all kinds of impact, friction and force.

The shock tube should not be knotted or overlapped two or more times in the connection block.

The bottoms of the detonators should always be held in the opposite direction (outward) from our body.

Shock tubes should never be pulled, stretched or bent excessively.

Connections of surface detonators should only be made by authorized personnel after all holes are filled and tightening is completed.

Detonators should always be handled and used with care and attention.

Delay Periods

Number	Delay Time	Color
SD 17	17	Yellow
SD 25	25	Red
SD 42	42	White
SD 67	67	Blue
SD 109	109	Black
SD 176	176	Orange
SD 200	200	Orange

Usage Areas

Firing DETEX LP detonators in gallery and tunnel blasting

For creating a delay between holes in all kinds of surface blasting

Storage Conditions

Like all explosives, DETEX SD should be stored and transported in accordance with Decree No. 87/12028 "Regulation on the Procedures and Principles of Hunting Equipment and Similar Explosives Excluded from Monopoly".

Sensitivity

DETEX SD is a non-electric ignition system. The DETEX SD can be ignited with a surface connector, an electric detonator and a minimum 5 gr/m detonating cord.

Safety Directive

DETEX SD is classified as dangerous and explosive material. Transport, handling and using of this product by people who are not qualified by reason of training, experience and authorization may cause injuries and fatal accidents. Therefore; carriage, use, and, when necessary, destruction or disposal of the product should be performed in accordance with the provisions set forth in the Decree no. 87/12028 "Regulation on the Procedures and Principles for Hunting Equipment and Similar Items related with Non-Monopoly Explosive Articles " and regulatory provisions in force.

Proper Shipping Name DETONATOR ASSEMBLIES, NON-ELECTRIC for blasting	UN Number 0360 - 0455
Class 1.1 B - 1.4 S