DETEX HD - Kırlıoğlu Patlayıcı | Kırlıoğlu Kimya Sanayi

DETEX HD combines the in-hole non-electric detonator cap (DETEX MS) and the surface detonator cap (DETEX SD). The delay of the detonator on both sides can be produced as desired. It provides ease of use especially in long series blasting such as channel blasting.

Usage Advantages

Possibility to be produced in desired shock tube length

Ease of use and carrying comfort

Explosive desensitization in column charge

Highest level of safety against mechanical impact and friction

Increasing work efficiency with fast use and ease of connection

Technical specifications

Shell Aluminum	Shock Tube 3 Layer - 3 mm diameter (outer)	Nominal Tensile Strength 25 kg (+20°C)
Usage Temperature Range -30°C to +60°C	Shelf Life 24 months

Usage Suggestions

During use, care should be taken not to damage the connection blocks, shock tube and other plastic apparatus.

Detonator caps should be kept away from all kinds of impact, friction and force.

The shock tube should not be knotted or overlapped two or more times in the connection block.

The bottoms of the detonators should always be held in the opposite direction (outward) from our body. Shock tubes should never be pulled, stretched or bent excessively.

Connections of surface detonators should only be made by authorized personnel after all holes are filled and tightening is completed.

Detonators should always be handled and used with care and attention.

Delay Periods

Number.	Delay Time	Color
HD 17/500	17-500	Yellow
HD 25/500	25-500	Red
HD 42/500	42-500	White
HD 67/500	67-500	Blue
HD 109/500	109-500	Black
HD 176/500	176-500	Orange
HD 200/500	200-500	Orange

Usage Areas

For creating a delay between holes in all kinds of surface blasting

Storage Conditions

Like all explosives, DETEX HD should be stored and transported in accordance with Decree No. 87/12028 "Regulation on the Procedures and Principles of Hunting Equipment and Similar Explosives Excluded from Monopoly".

Sensitivity

DETEX HD is a non-electric ignition system. The DETEX SD can be ignited with a surface connector, an electric detonator and a minimum 5 gr/m detonating cord.

Safety Directive

DETEX HD is classified as dangerous and explosive material. Transport, handling and using of this product by people who are not qualified by reason of training, experience and authorization may cause injuries and fatal accidents. Therefore; carriage, use, and, when necessary, destruction or disposal of the product should be performed in accordance with the provisions set forth in the Decree no. 87/12028 "Regulation on the Procedures and Principles for Hunting Equipment and Similar Items related with Non-Monopoly Explosive Articles " and regulatory provisions in force.

Proper Shipping Name DETONATOR ASSEMBLIES, NON-ELECTRIC for blasting	UN Number 0360 - 0455
Class 1.1 B - 1.4 S